Industrial Gantry Crane

Industrial gantry crane is extensively found in a variety of industrial sites to handle and move heavy loads. It is ideal for both indoor and outdoor applications. Unlike an overhead bridge crane, this type of crane does not need to be supported by building columns or engineering columns, therefore eliminating the needs for runway beams and support columns. These gantry cranes can be designed with different configurations to accommodate your specific applications.

Different Types of Industrial Gantry Cranes

Single girder gantry crane

The single girder crane can be designed to be full-gantry, semi-gantry or truss gantry based on your application requirements. It is ideal for light duty to moderate service in various industries. With only one bridge girder, this type of crane is less expensive than its double girder counterpart since it requires simpler hoist and trolley design, easier installation and less maintenance.

Single Girder Industrial Gantry Crane
Single Girder Industrial Gantry Crane

Single girder industrial gantry crane parameters:

  • Load capacity: 3-20t
  • Span: 8-35m
  • Lifting height: 6-18m
  • Lifting speed: 0.33-8m/min
  • Trolley running speed: 20m/min
  • Crane running speed: 20m/min
  • Work duty: A3, A4

Get a Free Quote


Single Girder Grab Bucket Gantry Crane
Single Girder Grab Bucket Gantry Crane

Single girder grab bucket gantry crane parameters:

  • Load capacity: 2-10t
  • Span: 8-35m
  • Lifting height: 6-18m
  • Lifting speed: 14-16m/min
  • Trolley running speed: 20m/min
  • Crane running speed: 20m/min
  • Work duty: A3, A4

Get a Free Quote

Double girder gantry crane

If the load you need to handle approaches 20 tons and more, or you need to cover a large span, a double girder gantry crane may be a better choice for increasing operational efficiency and work safety. It can be designed for the most demanding tasks in a number of different industries. Like single girder crane, it can also be designed to be full-gantry, semi-gantry or truss gantry system to suit customer’s  requirements.

Double Girder Gantry Crane
Double Girder Gantry Crane

Double girder gantry crane parameters:

  • Load capacity: 5-500t
  • Span: 18-35m
  • Lifting height: 6-18m
  • Lifting speed: 1.5-11.5m/min
  • Trolley running speed: 10-40.1m/min
  • Crane running speed: 16-50m/min
  • Work duty: A3-A7

Get a Free Quote

Wide Applications of Industrial Gantry Crane

Our gantry crane can be adapted to both light and heavy industry applications, such as heavy fabrication workshops, steel yards, scrap yards and chemical plants.

Full gantry crane is the most commonly used gantry lifting equipment. It can be used for almost all sorts of applications, such as heavy machine shops, outdoor yards and precast applications.

Semi-gantry crane is designed with one side supported by columns or structure of the industrial facility. It is commonly used in workshops, material storage warehouses and outdoor yards to handle heavy loads efficiently and safely, as well as save work space for you.

Semi Gantry Crane
Semi Gantry Crane

European type semi gantry crane parameters:

  • Load capacity: 3.2-20t
  • Span: 8-30m
  • Lifting height: 6-18m
  • Lifting speed: 0.66-5m/min
  • Trolley running speed: 2-20m/min
  • Crane running speed: 3-30m/min
  • Work duty: A5

Get a Free Quote

Portable gantry crane is perfect for light duty applications, such as to lift and hold a load when it is being fabricated, assembled or repaired. Riding on caster wheels or rubber wheels, the portable crane enables you to move it throughout your facility and position it anywhere you want it to be.

Gantry Crane Options

We offer a range of options and accessories to ensure you can receive the most appropriate gantry crane system from our company:

  • Gantry design: full-gantry, semi-gantry, truss gantry and portable gantry system
  • Rail mounted or wheel mounted
  • Hoist design: wire rope hoist, chain hoist
  • Lifting attachments: hook, grab bucket, electromagnetic chuck, carries beam, etc.
  • Power delivery: cable reel, diesel generator set or bare copper slip line
  • Safety equipment: anti-collision device, wind-resistant device, anti-sway device, load limiter, limit switches, warning horns and lights, walkways and railing, etc.
  • Paint color: according to your requirements
Gantry Crane for Iron And Steel Plant
Gantry Crane for Iron And Steel Plant

Grab gantry crane for iron and steel plant parameters:

  • Load capacity: 5-20t
  • Span: 18-35m
  • Lifting height: 6-18m
  • Lifting speed: 30.7-39.3m/min
  • Trolley running speed: 30.1-44.6m/min
  • Crane running speed: 37.7-40.1m/min
  • Work duty: A5-A7

Get a Free Quote

Advantages of Utilizing An Industrial Gantry Lifting Equipment

  • Wide applications. The gantry crane system can be used indoors, outdoors or both to your requirements.
  • Cost-effective. It can reduce material costs comparing to a similarly specified overhead crane since it eliminates the needs for building support columns and runway beams.
  • Mobility. It can be designed to be mobile and allows you to move it from one location to another easily.
  • High utilization. The gantry crane can be relocated in other workplace easily for reuse.
  • Large capacity. The equipment can be designed with extremely large capacity to lift a considerable amount of weight.
  • Excellent safety. Our gantry cranes can be delivered with a range of safety equipment and systems to ensure a safe lifting operation.
  • Custom design. We can custom design and build the crane to the specific needs of customers.

What to Look for in The Selection of A Gantry Crane

If you want to employ the right gantry crane in your facility for maximizing efficiency and streamlining workflow, there are a few things you will need to consider:

  • What type of crane you need? single girder, double girder, rail mounted or mobile type?
  • What kind of load you need to handle?
  • Your desired industrial gantry crane specifications, such as rated load capacity, lifting height, span, lifting speed and crane travel distance.
  • Duty cycle or service classification of the crane
  • The environment that the crane will be operating in (indoor, outdoor, dust, etc.)
  • Power delivery (cable reel, slip line or diesel generator set)
  • Other special requirements

Depending on your requirements, we can help you design and identify the most appropriate and economical gantry crane system for your production and facility.

If you are unsure as to which type of gantry crane is right for the job, please feel free to contact us by filling out the contact form or sending us an email to tell us your specific lifting requirements. Our sales manager will get back to you soon.                                                

Selecting A Reliable Industrial Gantry Crane Manufacturer

As a leading gantry crane manufacturer and supplier in China, we have a wealth of experience in the design and fabrication of gantry cranes. We can offer custom solution that ranges from small capacity, light duty cranes to large capacity, heavy duty cranes. All our products are designed and fabricated in line with the latest industry standards and national standards. What’s more, by using high quality steel and state of the art processing facilities, we are able to offer you unique quality products. We also provide a perfect after-sales service for overseas clients, such as the equipment installation, commissioning, maintenance, staff training and instruction.

If you are interested in industrial gantry crane, please don’t hesitate to contact us at any time.

    If you have any interest or need of our gantry crane, just feel free to send inquiry or email to us!





    * Basic Info